REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES AND FITTINGS (Continued)

REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES AND FITTINGS (Continued) - TM-10-4320-310-14_78

TM-10-4320-310-14 Pump Unit Flammable Liquid Centrifugal Self-Priming 2-Inch 100 GPM Diesel Engine Driven NSN 4320-01-263-3604 Manual
Page Navigation
72

TM 10-4320-31014 4-17. REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES AND FITTINGS (Continued) 13 Remove fuel pressure line (1) from injector (2) and injection pump (3). Tape or plug fittings. 14 Remove non-return valve (1) and gasket (2). Discard gasket (2). INSPECTION: Dry cleaning solvent P-D-680 (safety or Stoddard's Solvent) is potentially dangerous. Avoid repeated and prolonged breathing of vapors and skin contact with the liquid. Do not use near open flame, arcing equipment, or other ignition sources. Always wear eye protection and protective clothing. The flash point of P-D-68° is 100°F to 138°F (38°C to 59°C). 1 Inspect all fuel hoses for cracks, abrasions, or restrictions. Replace as necessary. 2 Inspect fuel pressure line (1) for damage, rust, corrosion, or restrictions. Replace if necessary. 4-23

Privacy Statement
Press Release
Contact