4-17. REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES AND FITTINGS

REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES AND FITTINGS (Continued) - TM-10-4320-310-14_78

TM-10-4320-310-14 Pump Unit Flammable Liquid Centrifugal Self-Priming 2-Inch 100 GPM Diesel Engine Driven NSN 4320-01-263-3604 Manual
Page Navigation
70

TM 10-432031014 4-17. REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES AND FITTINGS This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP Tools General Safety Instructions Tool Kit, General Mechanics Automotive Unit must by cool. Fuel tank must be empty. (Item 1, Appendix B) Well-ventilated area. Materials/Parts Dry cleaning solvent (Item 10, Appendix E) Gasket REMOVAL: Death or serious injury could occur If fuel is not handled carefully. Use in a well-ventilated area away from open flame, arcing equipment, Ignition sources, heaters, or excessive heat. Engine must be turned off and cool before refueling. Use proper refueling procedures and equipment to avoid spillage. Do not run engine near open fuel containers. Always store fuel in properly marked containers. DO NOT SMOKE. CAUTION As each fuel hose, connection, or connection port Is removed, be sure to tape over or plug each open connection to prevent contaminants from entering the fuel system 1 Remove screw (1), spacers (2), and clamp (3). 2 Remove fuel filter (4) from fuel hose (5) (fuel lift pump to fuel filter). 3 Remove fuel filter (4) from fuel hose (6) (fuel filter to injection pump). 4 Discard fuel filter (4) and tape or plug fuel hoses (5 and 6). 5 Remove fuel hose (5) from fuel lift pump discharge fitting. 4-21

Privacy Statement
Press Release
Contact