4-15. REPLACE AIR FILTER ASSEMBLY

REPLACE DIFFUSER, IMPELLER, SHAFT SEAL, BACKHEAD AND STUB SHAFT (Continued)

TM-10-4320-310-14 Pump Unit Flammable Liquid Centrifugal Self-Priming 2-Inch 100 GPM Diesel Engine Driven NSN 4320-01-263-3604 Manual
Page Navigation
66

TM 104320-310-14 4-15. REPLACE AIR FILTER ASSEMBLY This task covers: a. Removal c. Repair e. Installation b. Disassembly d. Assembly f. Operational Check INITIAL SETUP Tools General Safety Instructions Tool Kit, General Mechanics Automotive Unit must by cool. Well-ventilated area (Item 1, Appendix B) required during operational check. Pipe Wrench (Item 2, Appendix B) Pliers, Slip Joint, 9" Long (Item 2, Appendix B) REMOVAL: 1 Unscrew restriction indicator (1) from nipple (2). 2 Unscrew air cleaner (3) from street elbow (4). 3 Unscrew street elbow (4) from engine. DISASSEMBLY: 1 Remove wing nut (5) and sealing washer (6). Remove top (7) and air filter element (8). 2 Separate base connector (9), gasket (10) and rain hood (11). 4-17

Privacy Statement
Press Release
Contact