4-18. REPLACE FUEL LIFT PUMP

REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES, AND FITTINGS (Continued) - TM-10-4320-310-14_82

TM-10-4320-310-14 Pump Unit Flammable Liquid Centrifugal Self-Priming 2-Inch 100 GPM Diesel Engine Driven NSN 4320-01-263-3604 Manual
Page Navigation
76

TM 104320310-14 4-18. REPLACE FUEL LIFT PUMP This task covers: a. Removal c. Operational Check b. Installation INITIAL SETUP Tools General Safety Instructions Tool Kit, General Mechanics Automotive Well-ventilated area required. (Item 1, Appendix B) Equipment Materials/Parts Condition Para Condition Description Gasket 4-17 Fuel hoses removed from fuel lift pump. REMOVAL: Death or serious injury could occur If fuel is not handled carefully. Use in a well-ventilated area away from open flame, arcing equipment, Ignition sources, heaters, or excessive heat. Engine must be turned off and cool before refueling. Use proper refueling procedures and equipment to avoid spillage. Do not run engine near open fuel containers. Always store fuel In properly marked containers. DO NOT SMOKE. 1 Remove two hexagon nuts (1) and flat washers (6). 2 Remove fuel lift pump (2) and gasket (3). Discard gasket. 3 Remove inlet and outlet ring pieces and banjo bolts (5). 4-27

Privacy Statement
Press Release
Contact