TM 10-4320-310-14
5-13.
REPLACE/REPAIR FLYWHEEL (Continued)
INSTALLATION:
1
Align blower ring (12) holes with mounting holes on flywheel (4).
2
Install three new lock washers (11) and special socket head screws (10).
3
Using socket (Item 4, Appendix B), tighten special socket head screws to 22.13 foot-pounds (30 N-m).
4
Install four hexagon socket head screws (8) and new lock washers (9) through flywheel (4) and into engine
crankshaft.
5
Restrain flywheel (4).
6
Tighten hexagon socket head screws (8) to 51.6 foot-pounds (70 N-m).
7
Take restraint off flywheel. Make sure flywheel turns freely.
8
Install stub shaft (7), and secure to flywheel (4) with three new lock washers (6) and three hexagon socket head
screws (5).
9
Install engine adapter housing (3) and secure with four hexagon head screws (1) and four new lock washers (2).
5-36
