DISASSEMBLY - TM-10-4320-310-14

INSPECT/REPLACE CYLINDER HEAD AND VALVE ASSEMBLY (Continued) - TM-10-4320-310-14_114

CLEANING/INSPECTION - TM-10-4320-310-14_116

TM-10-4320-310-14 Pump Unit Flammable Liquid Centrifugal Self-Priming 2-Inch 100 GPM Diesel Engine Driven NSN 4320-01-263-3604 Manual
Page Navigation
108

TM 10-4320-310-14 5-10. INSPECT/REPLACE CYLINDER HEAD AND VALVE ASSEMBLY (Continued) DISASSEMBLY: Do not scratch the cylinder head sealing face. Scratches could cause poor sealing of cylinder head and cylinder. 1 Press down cup (1) and remove collet halves (2) from both valves. 2 Remove valve spring (3), washer (4) and cap (5) from both valves. 3 Remove valve (6) from cylinder head (7). 4 Remove hexagon nut (1) from threaded stud (2). Remove threaded stud. 5 Use needlenose pliers to remove pin (3) with ten spring plates (4) and preformed packing (5) attached. 6 Remove and discard preformed packing (5). 7 Knock out pin (6) and remove decompression shaft (7) and pinion (8) from cylinder head (9). 5-19

Privacy Statement
Press Release
Contact