TM 10-4320-310-14
5-10. INSPECT/REPLACE CYLINDER HEAD AND VALVE ASSEMBLY
This task covers:
a.
Removal
d.
Assembly/Adjustment
b.
Disassembly
e.
Installation/Adjustment
c.
Cleaning/Inspection
INITIAL SETUP
Tools
Material/Parts
Tool Kit, General Mechanics Automotive
Dry cleaning solvent (item 10, Appendix E)
(Item 1, Appendix B)
Cylinder Hold Down Clamp (Item 3, Appendix B)
Equipment
Dial Gauge (Item 3, Appendix B)
Para
Condition Description
Measuring Device (Item 3, Appendix B)
4-13
Pump housing assembly removed.
Micrometer, Depth (Item 3, Appendix B)
4-19
Fuel tank removed.
Micrometer, Inside (Item 3, Appendix B)
4-20
Muffler removed.
Retainer Bracket For Cylinder (Item 3, Appendix B)
4-22
Valve cover removed.
Micrometer, Outside (Item 3, Appendix B)
5-7
Injector removed from cylinder head.
Torque Wrench (Item 3, Appendix B)
Materials/Parts
General Safety Instructions
Gasket
Well-ventilated area required.
Preformed packing
REMOVAL:
1
Remove screw (1) and hexagon nut (2) from cowling (3).
2
Remove cowling (3) from engine.
5-17
