5-9. REPLACE CRANK ASSEMBLY GEARS

CLEANING/INSPECTION - TM-10-4320-310-14_112

TM-10-4320-310-14 Pump Unit Flammable Liquid Centrifugal Self-Priming 2-Inch 100 GPM Diesel Engine Driven NSN 4320-01-263-3604 Manual
Page Navigation
104

TM 10-4320-310-14 5-9. REPLACE CRANK ASSEMBLY GEARS This task covers: a. Removal c. Installation b. Cleaning/Inspection INITIAL SETUP Tools General Safety Instructions Tool Kit, General Mechanics Automotive Well-ventilated area required. (Item 1, Appendix B) Materials/Parts Dry cleaning solvent (Item 10, Appendix E) Grease (Item 3, Appendix E) Grease (Item 4, Appendix E) Gasket Lock washer REMOVAL: 1 Remove four hexagon socket head cap screws (1) and remove housing (2). 2 Remove and discard gasket (3). 3 Remove needle shell (4), oil seal (5), gear wheel (6) and stud (7) as an assembly. 4 Remove needle shell (4), oil seal (5) and stud (7) from gearwheel (6). 5 Remove disc (8). 6 Remove hexagon nut (9) and lock washer (10). Discard lock washer. 7 Remove pinion (11). 5-15

Privacy Statement
Press Release
Contact