TM 10-4320-307-24
4-18
CYLINDER BLOCK INSPECT/REPAIRLR/EPLACE(CONT).
DISASSEMBLY:
1.
Remove 12 capscrews and lockwashers (1) securing 2 water header covers (2) and cover gasket (3) to engine block
(4).
2.
Remove 19 pipe plugs (5).
3.
Remove expansion plug (6).
4.
Remove capscrew (7) securing each of six piston cooling nozzles (8) and O-ring seals (9) to engine block.
5.
Remove 6 cylinder liners (10), shims (11), crevice seals (12) and 12 O-ring seals (13).
6.
Remove hex stock plug (14) and washer (15).
7.
Remove six groove pins (16).
8.
Remove six dowel pins (17).
9.
Remove dowels (18).
10. Remove two rear main dowels (19).
11. Remove camshaft bushings (20).
4-137
