DISPENSING VALVE ASSEMBLY

Figure 5-11. including Figure 5-12, 11. Strike 12. Rivet, solid 13. Rivet 14. Hinge 15. Door 16. Seal, rubber 17. Seal, rubber 18. Box, storage 19. Bushing, brass 20. Bearing, ball Pump Unit Frame

TANK ASSEMBLY: GENERAL

TM-5-4930-230-13 Tank and Pump Unit Liquid Dispensing for Truck Mounting (Advanced Industries Model 1800) FSN 4930-070-1181 Manual
Page Navigation
115

TM5-4930-230-13 5-12. DISPENSING VALVE ASSEMBLY NOTE For removal see para 4-20. a. Disassembly. (figure 5-13) (1) Remove screen (1) and eyenut (2). Loosen setscrews (3) to release bonnet (4) and remove bonnet. (2) Remove spring (5), stem (6), retainer (7), disk (8) and nut (9). b. Cleaning and Inspection. WARNING Drycleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel and property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of solvent is 100 degrees F - 138 degrees F) (38 degrees C - 59 degrees C). (1) Clean parts with drycleaning solvent, (Item 1, App. E) and dry thoroughly. (2) Inspect all parts for cracks, breaks, or other damage. Replace a defective part. Replace all gaskets and packing, as necessary. c. Reassembly. (figure 5-13) (1) Assemble nut (9) disk (8), retainer (7), spring (5) and bonnet (4) together by compressing spring and securing in valve body (10) with setscrews (3). (2) Attach stem (6) and eyenut (2). (3) Install screen (1) before installing valve on tank. 5-27

Privacy Statement
Press Release
Contact