TM 5-4320-302-14
5-18.
STARTER MOTOR (CONT)
Location/Item
Action
Remarks
d.
Remove relay countersunk screws.
e.
Remove relay.
3.
Commutator
a.
Remove commutator bearing support screws.
bearing
b.
Remove capsule.
c.
Remove O-ring, retaining washer, and shims.
d.
Remove hex nuts and washers.
e.
Remove commutator bearing support.
4.
Brush holder and
Remove.
compression
springs
5.
Carbon brushes
Remove from brush holder.
6.
Commutator
Remove from commutator bearing support.
bush
7.
Exciter winding
Remove from armature and studs.
8.
Drive bearing
a. Remove drive bearing screw, spring washer,
and hex nut from drive bearing.
b.
Remove drive bearing.
9.
Forked lever
Remove.
10. Locking ring
Remove.
and ring
retainer
11. Pinion
Remove from armature.
12. Pinion bush
Remove.
13. Armature bearing
Remove.
support and
armature bush
14. Armature bush
Remove from armature bearing support.
15. Drive bush
Remove drive bush and studs from drive
bearing.
5-55
