TM 5-4320-302-14
Table 4-2. Organizational Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
lube oil cooler for leaks. Examine area of crankcase directly below shield and
lube oil cooler. If leaks cannot be easily detected and it can be determined that
engine can be run without damage, clean the engine as described below. After
engine is clean, start the engine and observe lubrication system for leaks. If
necessary, clean with compressed air as follows:
WARNING
Death or severe injury might result when com-
pressed air is used to blow dirt from skin or
clothing. Air entering body openings is ex-
tremely dangerous. Compressed air used for
cleaning shall not exceed 100 psi (690 kPa).
Use goggles or face shield for eye protection.
Do not direct airstream against skin.
Tighten loose components. Replace leaking components (para 4-16, 4-31,
and 4-32). If cover, front cover, or associated surfaces, other than fittings
or fasteners, are leaking, notify direct support.
4-42
