TM 5-4320-300-14
(2)
Remove engine side panels. Unfasten hasps and catch assemblies, then pull side panels up and out to
remove.
f.
Starting. Instructions for starting engine are located on inside of control panel cover. Follow these operating
instructions.
(1)
Turn battery switch on.
(2)
Pull out throttle 1/4.
WARNING
Do not actuate starting aid for more than 1 or 2 seconds at a time and more than twice with engine
stopped. Overloading the engine air box with this highly volatile fluid could result in an
explosion.
(3)
Pull ether start if required.
(4)
Push starter switch.
(5)
Pull throttle full out.
2-57