VALVES, CAMSHAFT, AND TIMING GEARS (CONT)

VALVES, CAMSHAFT, AND TIMING GEARS (CONT) - TM-5-4320-300-14_458

VALVES, CAMSHAFT, AND TIMING GEARS (CONT) - TM-5-4320-300-14_460

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
452

TM 5-4320-300-14 6-9. VALVES, CAMSHAFT, AND TIMING GEARS (CONT) Location/Item Action Remarks 58. Balance shaft Lubricate with MIL-L-2104 oil and attach over thrust washer end of balance shaft as shown. Install retaining bolts and torque to 30 to 35 ft lb (41 to 47 N.m). 59. Balance shaft Lubricate with MIL-L-2104 oil and install on gear and Wood- balance shaft end. ruff key 60. ear retain- Lubricate with MIL-L-2104 oil and install ing nuts fingertight. 61. Balance pulley Lubricate Woodruff keys, oil slingers, and end keys, oil spacers with MIL-L-2104 oil and install as slingers, and shown. spacers 62. Engine upper Position new gasket on engine block. Install front cover upper front cover and mounting bolts. Torque bolts to 35 ft lb (47 N.m). 63. Balance pulleys Install on both shafts. Install retaining nuts and retaining and tighten hand tight. nuts 6-75

Privacy Statement
Press Release
Contact