TM 5-4320-275-13 & P
CONNECTING ROD ASSEMBLY (CONT)
LOCATION/ITEM
ACTION
REMARKS
10. Crank
Wash in dry cleaning solvent, P-D-680. Use a soft-
bristle brush to remove old grease. After cleaning,
wipe the bore and journal surfaces with light oil
and wrap in lint-free paper until ready to assemble
on speed reducer and connecting rod.
11. Grease fitting
Use 9/16 inch wrench to install grease fitting (5).
INSTALLATION
12. Crank
Install square key (9) into keyway in gear reducer
shaft. Align keyway of crank (6) with square key
(9). Slide crank over square key and onto gear
reducer shaft.
4-76