TM 5-4320-275-13 & P
Table 4-3. Organizational Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3. Check for defective check valve assembly on
accumulator side of bowl.
Replace check valve assembly. Use 3/4 inch socket
and handle to remove four cap screws holding
accumulator on bowl. Remove accumulator, gasket,
and check valve assembly. Install a new gasket and
check valve assembly. Use 3/4 inch socket with a
torque wrench and tighten the four cap screws to a
torque of 40 ft lb (54 N.m). Use Loctite (Item 7,
Appendix D) on threads.
Section VI. MAINTENANCE PROCEDURES
INDEX
Para
Para
Accumulator
Gear reducer
Axle
Identification plate
Bowl, pump
Inspection
Clamp assembly
Operating plate
Connecting rod assembly
Plates, data
Coupling
Port, discharge
Data plates
Pump bowl
Diaphragm
Reducer, gear
Discharge port
Rod assembly, connecting
Engine
Strainer, fuel
Filter, fuel
Tires
Frame assembly
Tubes, inner
Fuel
U-bolts
Filter
Wheel assembly
Line
Strainer
Tank
4-23