TM 5-4320-200-13 & P
Figure 4-5.
Power Cable Replacement
(Electric Motor Driven Pump).
b.
Cleaning and Inspection.
Drycleaning solvent, P-D-680, used to
clean parts is potentially dangerous to
personnel and property.
Avoid inhalation
of fumes and repeated or prolonged skin
exposure.
Wash exposed skin thoroughly
with soap and water.
Use in well venti-
lated area away from open flame or exces-
sive heat.
Flash point is 100°F (38° C).
Clean the metal parts with an approved solvent and dry
thoroughly.
c.
Installation.
(1) Repeat the removal procedure in reverse sequence.
(2) Connect wires as follows:
MOTOR WIRE
CABLE WIRE
Black
;
White
Red
Ground
Green
(3) Insulate cable connections in accordance with standard
practices.
4-9
