TM 5-4320-200-13 & P
4-2.3.
Exhaust System.
The exhaust system maintenance and inspection procedures, are
listed and illustrated in TM 5-2805-256-14.
4-2.4.
Engine.
This section contains the engine removal procedures. All engine
maintenance procedures and instructions are described and illustrated
in TM 5-2805-256-14.
a.
Removal.
(1) Remove fuel lines and filter as per paragraph 4-2.2.
(2) Remove centrifugal pump as per paragraph 4-4.
b.
Cleaning and Inspection.
-
Drycleaning solvent, P-D-680, used to clean
parts is potentially dangerous to personnel
and property.
Avoid inhalation of fumes
and repeated or prolonged skin exposure.
Wash exposed skin thoroughly with soap and
water.
Use in well ventilated area away
from open flame or excessive heat.
Flash
point is 100°F (38°C).
(1) Clean exterior of engine with approved cleaning solvent
and dry thoroughly.
(2) Inspect engine for any external damage, tag engine,
noting any defects or damage, and return it to depot maintenance.
c.
Installation.
Repeat the removal procedure (para 4-2.4) in reverse
sequence.
4-2.5.
Frame.
Two channels mounted on the frame with shock mounts support the
engine and pump and absorb the shock and vibration of the pump while
in operation,
The tubular frame supports and protects the pump and
engine.
a.
Removal.
(1) Remove
(2) Remove
fuel lines and filter as per paragraph 4-2.2.
centrifugal pump as per paragraph 4-4.
4-5
