TM 5-3825-270-23&P
FIELD MAINTENANCE
FRONT ENCLOSURE PANEL REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4023
(WP 0225, Table 1, Item 12)
Equipment Condition
Engine compartment cover removed. (WP 0142)
Materials/Parts
Gasket, Foam (WP 0226, Table 1, Item 71) Qty: 1
Foam, Barrier (WP 0226, Table 1, Item 70) Qty: 2
REMOVAL
NOTE
Plate supports are not interchangeable. Tag and mark plate supports prior to removal to
ensure proper installation.
1.
Remove six screws (Figure 1, Item 4), plate support (Figure 1, Item 2), plate support (Figure 1, Item 5), and
front enclosure panel (Figure 1, Item 3) from two side rails (Figure 1, Item 1).
1
3
1
2
5
4
Figure 1. Front Enclosure Panel Removal.
NOTE
Perform Steps (2) and (3) if foam gaskets are damaged.
Note position of foam gaskets prior to removal to ensure proper installation.
2.
Remove foam gasket (Figure 2, Item 6) from front enclosure panel (Figure 2, Item 3). Discard foam gasket.