TM 5-3825-270-23&P
0138
REMOVAL - Continued
3.
Remove nut (Figure 1, Item 4), lockwasher (Figure 1, Item 5), and white wire (Figure 1, Item 7) from stud
(Figure 1, Item 6). Discard lockwasher.
4.
Remove nut (Figure 2, Item 18), lockwasher (Figure 2, Item 19), and red wire (Figure 2, Item 17) from stud
(Figure 2, Item 20). Discard lockwasher.
13
14, 15, 16
18, 19, 20
17
Figure 2. Starter Relay Removal.
5.
Remove two nuts (Figure 2, Item 14), lockwashers (Figure 2, Item 15), and starter relay (Figure 2, Item 13)
from two isolators (Figure 2, Item 16). Discard lockwashers.
NOTE
Perform Step (6) if isolator is damaged.
All isolators are removed the same way. Top isolator shown.
6.
Remove screw (Figure 3, Item 21), lockwasher (Figure 3, Item 22), and isolator (Figure 3, Item 16) from
mounting surface (Figure 3, Item 23). Discard lockwasher.
16
21, 22
23
Figure 3. Starter Relay Removal.
END OF TASK