TM 5-3825-270-23&P
0128
INSTALLATION - Continued
ENGINE AND PUMP SHOWN
REMOVED FOR CLARITY
55
53, 54
52
56, 57
58
Figure 21. Engine Module Installation.
6.
Install two screws (Figure 21, Item 56) and washers (Figure 21, Item 57) in discharge tube support bracket
(Figure 21, Item 58), water pump assembly (Figure 21, Item 52), and flywheel housing (Figure 21, Item 55).
7.
Position bottle jack and lumber beneath front of oil pan (Figure 22, Item 65).
65
LUMBER
BOTTLE
JACK
Figure 22. Engine Module Installation.
CAUTION
Do not jack engine module up too high. Only raise engine module in small increments until
snubbing washers can be installed. Failure to comply may result in damage to equipment.
8.
Using bottle jack and lumber, raise engine module (Figure 23, Item 59) until four lower snubbing washers
(Figure 23, Item 62) can be installed between lower isolator mounts (Figure 23, Items 60 and 61) and frame
(Figure 23, Item 44).
