TM 5-3825-270-23&P
0085
CONNECT - Continued
WARNING
Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.
Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a
direct short, severe burns, or electrical shock. Failure to comply may result in injury or death
to personnel.
NOTE
Install cables as noted prior to removal.
Main negative terminal should always be disconnected first and reconnected last.
1.
Install terminal (Figure 4, Item 17) on positive post (Figure 4, Item 16) of battery (Figure 4, Item 12).
15
16
12
17
Figure 4. Connect Batteries.
2.
Tighten nut (Figure 4, Item 15) to 84 to 96 lb-in (9 to 11 Nm).
3.
Install jumper cable (Figure 5, Item 11) and terminal (Figure 5, Item 10) on positive post (Figure 5, Item 8) of
battery (Figure 5, Item 3).
