TM 5-3825-270-23&P
0082
BATTERY TESTING - Continued
1
ELECTROLYTE AND ANTIFREEZE
2
TESTER
Figure 1. Battery Testing.
2.
Using electrolyte and antifreeze tester, check specific gravity on all cells of batteries (Figure 1, Item 2).
3.
Install battery cell caps (Figure 1, Item 1) on batteries (Figure 1, Item 2).
END OF TASK
CLEAN BATTERY CABLES
WARNING
Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and rubber gloves,
and do not smoke when performing maintenance on batteries. Injury will result if acid contacts
skin or eyes. Wear rubber apron to prevent clothing from being damaged. Failure to comply
may result in injury or death to personnel.
NOTE
All battery cables are cleaned the same way.
1.
Disconnect batteries. (WP 0085)
2.
Using battery brush, clean battery terminals (Figure 2, Item 4) and posts (Figure 2, Items 3) with sodium
bicarbonate (baking soda) and water to remove any corrosion.
