TM 5-3825-270-23&P
0078
INSTALLATION - Continued
NOTE
Install wires as noted prior to removal.
3.
Install red wire (Figure 6, Item 7) on terminal two (Figure 6, Item 8) of 15-amp circuit breaker (Figure 6, Item
9).
7
8
9
11
10
Figure 6. 15-amp Circuit Breaker Installation.
4.
Install clear wire (Figure 6, Item 11) on terminal one (Figure 6, Item 10) of 15-amp circuit breaker (Figure 6,
Item 9).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
5.
Apply sealing compound to the threads of six screws (Figure 7, Item 3).