TM 5-3825-270-10
OPERATOR MAINTENANCE
DISCHARGE FROM HOSE REEL ASSEMBLY
INITIAL SETUP:
Not Applicable
DISCHARGE FROM HOSE REEL ASSEMBLY
NOTE
Ensure that all valves and petcocks are in the closed position prior to performing this task.
For normal operating pressures, refer to WP0002, Table 1.
1.
Fill water distributor (WP 0011).
2.
Ensure that water pump is primed (WP 0019).
3.
Unstow hose from hose reel (WP 0078).
4.
Open valve V1 (Figure 1, Item 1).
1
Figure 1. Discharge From Hose Reel Assembly.
5.
Open control panel cover (Figure 2, Item 2) by releasing rubber t-handle (Figure 2, Item 3).
