TM 5-3825-270-10
0017
DISCHARGE FROM HOSE REEL ASSEMBLY - Continued
CAUTION
Release engine start/stop switch once engine is started. Failure to comply may result in
damage to equipment.
Do not let engine run more than 5 minutes without circulating water through pump. Failure
to comply may result in damage to equipment.
7.
Start engine by pressing up and holding the engine start/stop switch (Figure 3, Item 4) until engine is started.
8.
Adjust engine rpm (Figure 3, Item 5) by pressing up or down on the rpm switch (Figure 3, Item 8).
CAUTION
Ensure that engine speed is more than 1500 rpm. Failure to comply may result in damage to
equipment.
9.
When engine rpm (Figure 3, Item 5) is to desired setting press set switch (Figure 3, Item 7) to set rpm.
10.
Open valve V7 (Figure 4, Item 9).
9
Figure 4. Discharge From Hose Reel Assembly.
WARNING
Use caution when opening hose nozzle to begin discharge procedure. Water is under high
pressure. Failure to comply may result in injury or death to personnel.
11.
Turn hose nozzle (Figure 5, Item 10) clockwise to desired spray pattern and continue mission.
