TM 5-3820-276-10-2
0228
HYDRAULIC OIL RESERVOIR SERVICING - MUD CLEANING SYSTEM (MCS) - Continued
2.
Clean area around hydraulic reservoir cap (Figure 1, Item 1) with clean cleaning cloth.
2
3
1
WWDS00389
Figure 1.
Hydraulic Oil Reservoir.
3.
Remove hydraulic oil reservoir cap (Figure 1, Item 1) from hydraulic oil reservoir tank (Figure 1, Item 2).
NOTE
When hydraulic fluid temperature increases in hot weather, or from extended use,
fluid will expand and read higher on sight gauge.
When hydraulic fluid temperature deceases in cold weather, fluid will contract and
read lower on sight gauge.
4.
Add hydraulic oil to reservoir tank (Figure 1, Item 2) until sight gauge (Figure 1, Item 3) shows hydraulic oil
level midway between HIGH and LOW lines.
5.
Install hydraulic oil reservoir cap (Figure 1, Item 1) on hydraulic oil reservoir tank (Figure 1, Item 2).
6.
Clean any hydraulic oil spilled on hydraulic oil reservoir tank (Figure 1, Item 2) with cleaning cloth.
7.
Close right side catwalk and steps (Volume 1, WP 0055).
END OF TASK
END OF WORK PACKAGE
02/13/2013root(gen.maintwp)wpno(M40004)
