• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ENGINE COOLING SYSTEM SERVICING - MUD CLEANING SYSTEM (MCS) - Continued
Figure 1. Hydraulic Oil Reservoir

Technical Manual For Water Well Drilling System (Wwds) - 2 Page Navigation
  704    705    706    707    708  709  710    711    712    713    714  
img
. . .
TM 5-3820-276-10-2
0228
OPERATOR MAINTENANCE
HYDRAULIC OIL RESERVOIR SERVICING - MUD CLEANING SYSTEM (MCS)
INITIAL SETUP:
Materials/Parts
Equipment Condition
Cloth, Cleaning (WP 0233, Table 1, Item 5)
Engine off (Volume 1, WP 0050)
Lubricating Oil, Hydraulic
(WP 0233, Table 1, Item 16)
References
Volume 1, WP 0049
Volume 1, WP 0055
HYDRAULIC OIL RESERVOIR SERVICING - MUD CLEANING SYSTEM (MCS)
WARNING
Do not open or disconnect hydraulic hoses or fittings while the hydraulic oil is hot or under
pressure. Hydraulic oil is flammable and harmful to the skin and eyes. The hydraulic tanks
and metal parts can be hot. Wear work gloves and eye protection when handling hydraulic
hoses, motors, and hydraulic parts. If hydraulic oil contacts skin, wash the affected area
immediately. In case of eye contact, flush with water for 15 minutes. Dispose of hydraulic
oil in accordance with standard operating procedures. Failure to comply may result in injury
or death to personnel. Seek medical attention in the event of an injury.
1.
Lower right-side steps and catwallk (Volume 1, WP 0049).
0228-1
02/13/2013root(gen.maintwp)wpno(M40004)


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.