TM 5-3820-276-10-2
0206
WWDR REAR WHEEL AND TIRE ASSEMBLY REPLACEMENT - Continued
10.
Remove drilling console panel cover (Figure 2, Item 1) from drilling console (Figure 2, Item 2).
1
2
WWDS00604
Figure 2.
WWDR Drilling Console Panel Cover Removal.
11.
Set CONSOLE POWER switch (Figure 3, Item 1) to ON position.
1
2
4
3
WWDS00605
Figure 3.
Lowering WWDR Downriggers.
NOTE
Terrain conditions may require lowering of all four downriggers to stabilize vehicle.
If replacing a rear wheel and tire assembly, use left rear downrigger or right rear
downrigger. Procedures are the same for both sides. Left side shown.
12.
If replacing left rear wheel and tire assembly (Figure 3, Item 4), set JACK LR switch (Figure 3, Item 2) to up
position to lower left rear downrigger (Figure 3, Item 3) until left rear tire (Figure 3, Item 4) is off ground.
