TM 5-3820-276-10-2
OPERATOR MAINTENANCE
WHEEL AND TIRE ASSEMBLY REPLACEMENT - WATER WELL DRILLING RIG (WWDR) AND WATER
WELL SUPPORT VEHICLE (WWSV)
INITIAL SETUP:
Tools and Special Tools
Tools and Special Tools (cont.)
Adapter, 1/2-in. X 3/4-in.
(WP 0231, Table 2, Item 27)
(WP 0231, Table 2, Item 1)
Extension, 1-in. X 6-in.
Personnel Required
(WP 0231, Table 2, Item 6)
Two
Handle, Extension (WP 0231, Table 2, Item 11)
Handle, Lug Wrench (WP 0231, Table 2, Item 12)
Multiplier, Torque, Gear Ratio 3 to 1
References
(WP 0231, Table 2, Item 14)
Volume 1, WP 0012
Reflector Set, Highway Warning, Triangular
Volume 1, WP 0017
(WP 0231, Table 2, Item 16)
Volume 1, WP 0029
Socket, 33-mm X 1-in. Drive
Volume 1, WP 0048
(WP 0231, Table 2, Item 21)
Socket, 33-mm X 30-mm
Equipment Condition
(WP 0231, Table 2, Item 22)
WWSV setup (Volume 1, WP 0032)
Wrench, Torque 1/2-in. Drive
Tire stack removed (WP 0213)
WWDR REAR WHEEL AND TIRE ASSEMBLY REPLACEMENT
WARNING
Always wear double hearing protection, safety glasses, hard hat, gloves, and steel toe
shoes during operation of the Water Well Drilling System. Failure to comply may result in
injury or death to personnel. Seek medical attention in the event of an injury.
1.
Set up highway warning reflector set, as required.
2.
Start WWDR (Volume 1, WP 0012).
0206-1
02/13/2013root(maintwp)wpno(M00009)