TM 5-3820-276-10-2
0149
LOW OR NO WELD OUTPUT AND GENERATOR POWER OUTPUT OKAY AT AC RECEPTACLES -
WELDER/GENERATOR - Continued
CORRECTIVE ACTION - Continued
MALFUNCTION
Insufficient welding connections.
CORRECTIVE ACTION
Verify welding cables (Figure 1) are tight on welder/generator (Volume 1, WP 0044).
WORK
ELECTRODE
CONNECTION
CONNECTION
WWDS00465
Figure 1.
Welding Cable Connection.
a.
If cables are tight, proceed to next MALFUNCTION - Insufficient ground clamp connection.
b.
If cables are not tight, tighten cable connections (Volume 1, WP 0044).
MALFUNCTION
Insufficient ground clamp connection.
CORRECTIVE ACTION
Verify grounding clamp is properly connected to work piece (Figure 2).