TM 5-3820-276-10-1
0066
WWDR/WWSV SLAVE STARTING PROCEDURES - Continued
3
1
2
7
6
5
4
WWDS00307
Figure 7.
Starting Vehicle.
NOTE
Brake system failure (low air) alarm will sound until air pressure reaches 60 to 75 psi (414
to 517 kPa).
16.
Check air pressure gauge (Figure 7, Item 3). Air pressure must be 60 to 130 psi (414 to 896 kPa).
17.
Check fuel gauge (Figure 7, Item 5). Make sure enough fuel is indicated to complete mission.
NOTE
Coolant temperature gauge may not show reading at engine idle.
Normal coolant temperature range during operation is 180F to 200F (82C to
93C).
18.
Check coolant temperature gauge (Figure 7, Item 4). Temperature must be less than 219F (104C).
19.
Check battery voltage gauge (Figure 7, Item 2). Battery voltage gauge must be between 24 and 28 volts.
CAUTION
If fault occurs on electronic display, immediately shut off engine and notify maintenance.
Failure to comply may result in damage to equipment.
20.
Check electronic display (Figure 7, Item 1) for faults.