TM 5-3820-276-10-1
0040
AUTOMATIC GROUTER OPERATION - Continued
6.
Push Water Pump flow divider valve lever (Figure 4, Item 6) to DOWN OFF position when correct amount of
water is reached.
7.
Close main water valve (Figure 4, Item 1).
8.
Add required amount of grout to mixing tank (Figure 4, Item 2).
9.
Pull Grout Mix flow divider valve lever (Figure 4, Item 7) to UP MAX. position to desired mixing speed.
10.
Allow grout to mix for a required amount of time.
11.
Push Grout Mix flow divider valve lever (Figure 4, Item 7) to DOWN OFF position.
12.
Open main grout valve (Figure 4, Item 4).
13.
Set Grout Pump Auto switch (Figure 4, Item 3) up to ON position.
14.
With aid of an assistant, operate grout hose at well hole as required.
NOTE
If grout pump stalls at one end, immediately refer to manual grout pump operation.
15.
Pull Grout Pump flow divider valve lever (Figure 4, Item 5) to Up MAX. position to desired flow.
16.
Shut down grouter.
END OF TASK
0040-4
02/13/2013root(opusualwp)wpno(O20017)