TM 5-3820-276-10-1
0022
IQAN DISPLAY OPERATION - Continued
a.
Clock/DATE
b.
Eng. load cur. sp.
c.
Accel. ped. pos.
d.
Fuel pressure
e.
Fuel rate
f.
Eng. Speed
g.
Eng. Load
h.
Eng. Oil Pressure
i.
Coolant Temp.
j.
Boost Pressure
k.
Intake Air Temp.
l.
Fuel temp.
m.
Battery voltage
NOTE
All values below should display 0% or 100%. A reading of 0% indicates proximity switch is
not activated for that function. Readings of 100% indicate proximity switch is activated for
specified function.
2.
To gain access to data on automation inputs, perform following steps:
a.
Press ESC button (Figure 1, Item 2) and up on UP/DOWN button (Figure 1, Item 1) until MEASURE
window is displayed.
b.
Press F1 button (Figure 1, Item 3) until VOLTAGE IN is displayed. Press F1 button again.
c.
Press F1 button (Figure 1, Item 3) again.
0022-2
02/13/2013root(opusualwp)wpno(O10015)