TM 10-4930-236-13&P OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES B - Before D - During A - After W - Weekly M - Monthly INTERVAL PROCEDURES EQUIPMNET IS ITEM ITEM TO BE CHECK FOR  AND HAVE REPAIRED NOT READY/ NO B D   A W M INSPECTED OR ADJUST AS NECESSARY AVAILABLE IF: WARNING A spring loaded mechanism can cause injury if released in an uncontrolled manner. The rewind spring is under high tension when the ground cable is extended. This may cause reel to rapidly rotate in reverse. 4 * * * Static Check for broken clamp, cable or cable Broken cable, Discharge coating. Refer to next higher level of coating or Reel maintenance for repairs. clamp that would not allow a proper ground. 5 * * * Filter/Separator Refer to TM5-4330-232-12&P for Water Detector procedures to inspect filter/separator. Kit 6 * * * EMD Pump Check pump and components for proper Evidence of operation, damage or leakage. Notify fuel leakage. next higher level of maintenance for repair. WARNING Low voltage can cause Severe Shock or Death.  Disconnect power cable from vehicle NATO slave receptacle before replacing or repairing electrical components. 7 * * Junction Box Check for damaged cables, loose Damaged connections, switch, or connectors. connectors, Check junction box for defective cover switch cables seal.  Tighten connections if required. (that could cause sparks), Notify next higher level of maintenance or cover seal. for repair. 2-9