SECTION III. TECHNICAL PRINCIPLES OF OPERATION

CHAPTER 2 OPERATING INSTRUCTIONS - TM-10-4930-236-13P_18

TM-10-4930-236-13P Tank and Pump Unit Liquid Dispensing; for Truck Mounting Mil Design Tank and Pump Unit Electric Motor Driven Model (97403) Manual
Page Navigation
6

TM 10 4930-23-13&P c. Electric Motor Model/PN 13217E7131 to Length 16.58 in. (42.11 cm) Width 5.59 in. (14.46 cm) Height 6.34 in. (16.10 cm) Weight 86.5 lb. (39.32 kg) Input 24 Vdc Rated current (at 1.5 hp load) 55A Rated Speed (with motor at 35oC) 3600 rpm Operating speed 3100 rpm 1-11. Safety, Care and Handling. Observe all WARNINGS, CAUTIONS and NOTES in this manual. This equipment can be extremely dangerous if these instructions are not followed. SECTION III. TECHNICAL PRINCIPLES OF OPERATION 1-12 Principles of Operation. Once the bottom loading valves are opened, the pump draws fuel from the tanks and sends it to the filter/separator. The filter separator removes contaminants and water then fuel flows to hose reels and fueling nozzles to be dispensed into vehicles needing refueling. Auxiliary fuel supply hose is connected to the bottom loading port to refuel tanks. A jet level sensor in the top of each tank senses when tanks are full and automatically shuts bottom loading valve to stop fuel flow into tank. 1-6

Privacy Statement
Press Release
Contact