TM 10-4930-204-13
Figure 4-2. Tank and Pump Unit Vertical Tiedown Strap Assembly.
e. Pump Unit Tiedown Strap Assembly.
(1) Refer to figure 4-2 for identification of the tiedown strap assembly.
(2) Refer to figure 4-3 and hook the loose bracket over the top of the reel frame (the long side with the hole
out and down). Hook the bracket attached to the strap end beneath the rear truck from 8 to 10 inches (20 to 25 cm)
right of center.
(3) Pace the strap end up through the space between the tailgate and the truck body. Insert the strap end, rear
to front, through the slot in the center of the ratchet spool, Pull the slack through the ratchet spool by the strap end.
(4) Unlock the ratchet; move the ratchet handle in an up-and-down motion until the strap is tight; push the rat-
chet handle to its closed position.
(5) Raise the tailgate.
4-5. EQUIPMENT CONVERSION.
Refer to paragraph 4-23 for procedures to replace the gasoline engine driven pump with an electric motor driven
pumping assembly.
4-4
Change 4
