TM 10-4930-204-13
Figure 3-4. Servicing Fuel Strainer.
3-8.1. PUMP ASSEMBLY (EMD)
Disconnect intervehicle power cable before maintaining or
replacing component parts.
a. The electric motor requires an intervehicular power cable.
(1) Unplug and inspect intervehicle power cable (figure 3-4.1) for damaged or corroded connectors.
(2) Clean connectors to obtain a good connection at J2 connector at Junction Box and connector and adapter
at the vehicle receptacle.
(3) Replace cable assembly if damaged.
b. The electric motor is controlled by an ON-OFF switch cable.
(1) Inspect ON-OFF switch cable (figure 3-4.1) for damage or corroded connectors, damaged or frayed cable,
or damaged switch.
Change 4
3-13
