TM 10-4930-204-13
(7) Replace any damaged or defective parts.
e.
Reassembly (All Models Except 36W50).
(1) Attach vertical roller (31, fig. 5-14), horizontal rol-
ler (30), vertical axle (29), vertical roller (28), and setscrew (27)
to roller bracket (6).
(2) Attach hub (26) and spindle spacer (25) to flange (24)
and install screw (23).
(3) Install flange ring (22) and secure with bolt (21).
(4) Install bushing (20), flange bearing (19), bolt (18),
side plate (17), lock collar (16), and setscrew (15).
(5) Insert pipe (14) into hub (26) and connect coupler
elbow (13) to pipe.
(6) Install washer (12) and nut (11).
(7) Install flange (10) and capscrew (9).
(8) Attach ratchet wheel (8) to flange and secure with
bolt (7).
(9) Install roller bracket (6), side plate (5), lockwasher
(4), nut (3), bushing (2) and spring housing assembly (1).
f.
Reassembly (Model 36W50).
(1) Install self-locking nut (34, fig. 5-15), pawl stud
(33), pawl (32), washer (31), and cotter pin (30).
(2) Insert bearing retainer (29) into pipe assembly (15)
and attach cotter (28).
(3) Insert key (27) into pipe assembly (26) and attach pipe
to inner flange (25).
(4) Install bolt (24), inner side plate (23), washer (22),
and nut (21).
(5) Install spacer ring (20), bearing (19), adapter (18),
and ball bearing (17).
(6) Install O-ring (16) and connect pipe assembly (15) to
adapter (18).
(7) Install spacer (14), capscrew (8), flange, inner (25),
washer (7), and nut (6).
(8) Install spacer (10), setscrew (11), and outer flange
(12).
5-34
