TM 10-4930-204-13
(3) Remove screws,
bearing retaining plate, and gasket
(fig. 5-6).
(4) Remove nuts and housing from engine base.
(5) Remove remaining bearing plate and crankshaft.
Figure 5-6.
Crankshaft, Removal and Installation.
b.
Disassembly.
(1) Remove seal (1, fig.
5-7), retainer ring (2) and
bearing cup (3) from crankshaft (12).
(2) Remove bearing cone (4), crankshaft gear (5), and pull
Woodruff keys (6 and 7) from crankshaft.
(3) Remove seal (8), retainer ring (9), bearing cup (10),
and bearing cone (11).
5-13
