TM 10-4930-204-13
(4) Press piston and connecting rod upward through top of
crankcase assembly.
(5) Remove retainer (4) and pull piston pin (5) from piston
(6).
Separate piston (6) from connecting rod (7).
(6) Remove compression rings (8), scraper ring (9), and oil
ring (10) from piston (6).
1.
Capscrew
6.
Piston
2.
Lockwasher
7.
Connecting rod
3.
Connecting rod cap
8.
Compression ring (2)
4.
Retainer
9.
Scraper ring
5.
Piston pin
10.
Oil ring
Figure 5-5.
Pistons and Connecting Rod, Removal, Disassembly,
Reassembly and Installation.
5-11
