TM 10-4930-204-13
(b) Inspect all parts for cracks, breaks, and other
damage.
Replace defective parts.
(c)
Inspect mounting hardware for damaged threads.
Replace missing or damaged parts. -
(d) Replace cylinder head gasket.
(3) Installation.
(a) Install cylinder head and new gasket, cylinder
head bolts, and fuel tank retaining bolt (fig. 4-23).
(b) Install ignition bracket and air shroud (para
4-24c.).
(c)
Install spark plug (para 4-24e.).
4-24.
(d) Torque bolts in sequence as indicated in figure
Figure 4-24.
Cylinder Head Bolts Tightening Sequence.
m.
Tappet Cover Plate and Tappets.
(1) Removal.
Remove screw that secures tappet cover plate
and remove plate (A, fig. 4-25).
4-47