TM 10-4930-204-13
4-24.2 ON-OFF SWITCH CABLE, J1.
a. Test for continuity.
(1) Use multimeter with switch in the ON position.
(2) If reading is other than 0 ohms, replace cable or defective connector.
b. Connector Removal.
(1) Loosen screws.
(2) Unscrew connector.
(3) Tag and unsolder leads.
c. Connector Replacement.
(1) Solder leads. Use solder (Appendix F, Item 7.1)
(2) Tighten connector.
(3) Tighten screws.
Change 4
4-48.3