TM 10-4630-207-13&P
0049 00
WARNING
The engine is heavy. To prevent injuries, never stand or reach under a
suspended engine. Ensure lifting equipment is of adequate capacity (2000-
lbs) and operator is trained and approved to use the equipment.
21. Attach lift hooks to new engine and lift the engine onto the skid lining up the holes (figure 30, item 1)
to install the mounting hardware.
22. Install the engine mounting bolts, nuts and flat washers (figure 30, item 1) that secure the engine to
the skid (figure 30, item 2).
1
1
2
Figure 30. Installing Engine onto Skid
23. Install the drive belt as described in WP 0029 00.
24. Install the pulley guard onto the skid as described in WP 0044 00.
CAUTION
To maintain balance of the skid while suspended, it is important to position the rear
lifting chain behind the vacuum pump.
25. Attach lift hooks (figure 31, item 1) to skid lifting eyes (figure 31, item 2) as shown. Ensure rear lifting
chain (figure 31, item 3) is positioned behind vacuum pump port (figure 31, item 4).
0049 00-27
