TM 10-4630-207-13&P
UNIT MAINTENANCE
WASTE WATER VACUUM TANK TRAILER
NSN 4630-01-513-8155
PULLEY GUARD
REPLACE
INITIAL SETUP:
Tools
Personnel Required
Tool Kit, General Mechanic's, Automotive (WP
63B Light Vehicle Mechanic
Materials/Parts
Equipment Condition
Gloves, Work (WP 0089 00, Table 2, Item 5)
Engine shut off.
Rags, Wiping (WP 0091 00, Item 28)
Ignition key removed
Emergency stop button pushed In
Wheel chocked
Emergency brake set
REPLACE
To replace the pulley guard, proceed as follows:
1. Remove throttle mounting plate (figure 1, item 1) with throttle attached (figure 1, item 2), by removing
two hex bolts (figure 1, item 3), nuts, flat and lock washers (figure 1, item 4). Retain hardware. Do
not disconnect throttle from engine. Move the disconnected throttle linkage out of the way during
replacement of the pulley guard.
2
3
1
2
4
Figure 1. Removal of Throttle
0044 00-1
