TM 10-4630-207-13&P
UNIT MAINTENANCE
WASTE WATER VACUUM TANK TRAILER
NSN 4630-01-513-8155
TOOL BOX
REPLACE
INITIAL SETUP:
Tools
Personnel Required
Tool Kit, General Mechanic's, Automotive (WP
MOS 63B Light Vehicle Mechanic
Materials/Parts
Equipment Condition
Gloves, Work (WP 0089 00, Table 2, Item 5)
Rags, Wiping (WP 0091 00, Item 28)
REPLACE
1. Open toolbox (key is on ignition key ring) (figure 1, item 1) and empty its contents.
2. Close toolbox cover (figure 1, item 2).
3. Loosen and remove tool box mounting bolts (figure 3, item 1), flat washers (figure 3, item 2) nuts
(figure 4, item 1) and lock washers (figure 4, item 2)
4. Remove toolbox (figure 1, item 1).
5. Install new (or previously removed) toolbox.
6. Fasten toolbox in place with mounting bolts (figure 3, item 1), flat washers (figure 3, item 2), nuts
(figure 4, item 1) and lock washers (figure 4, item 2).
7. Place contents back into toolbox.
8. Close and lock toolbox cover.
0041 00-1
