TM 10-4630-207-13&P
0049 00
1
2
3
1
Figure 28. Removing the Engine Pulley Adapter
c.
Keep tightening the bolts in a star pattern until the pulley adapter (figure 29, item 1) is extracted.
Recover and retain key.
d. Remove the pulley (figure 29, item 2) and pulley rim from the drive shaft (figure 29, item 3).
20. Install the pulley on the replacement engine as follows:
a. Place pulley (figure 29, item 2) with deep stop towards engine onto drive shaft (figure 29, item
3).
b. Ensuring that the key is in place, install pulley adapter (figure 29, item 1) onto drive shaft.
c.
Install three bolts and flat washers (figure 29, item 4) to secure the pulley in place.
4
1
3
2
Figure 29. Removing the Engine Pulley and Rim
0049 00-26
