TM 10-4630-207-13&P
0045 00
2. Hard line to `tee'.
a. Loosen and remove hard line to `tee' (figure 42, item 1).
b. Loosen and remove hard line clamp mounting nut (figure 43, item 2). Retain hardware.
c.
Discard old hard line in an approved container.
d. Connect new hard line to `tee' (figure 43, item 1).
e. Connect hard line to brake actuator hose fitting (figure 42, item 1).
f.
Fasten hard line in place with clamp and tighten mounting nut (figure 43, item 2).
g. Refill brake fluid system in accordance with brake filling and bleeding procedures within this Work
Package.
1
Figure 42. Hard Line To Actuator Hose Fitting
0045 00-34
