TM 10-4630-207-13&P
0045 00
Brake
Disassembly
1. Master cylinder
a. Place an approved container under the master cylinder hose bracket (figure 12, item 1).
b. Loosen and remove hard line fitting (figure 12, item 2) from the brake hose (figure 12, item 3).
c.
Drain brake fluid from master cylinder into an approved container.
d. Loosen and remove cylinder hose bracket mounting bolts (figure 12, item 4) and lockwashers
(figure 12, item 5). Retain hardware.
e. Loosen and remove the brake hose from the orifice connector (figure 12, item 6).
3
1
2
6
5
4
Figure 12. Master Cylinder Brake Hose
f.
Remove cylinder cover (figure 13, item 4).
g. Unscrew cap (figure 13, item 5) from master cylinder.
h. Loosen and remove mounting bolts (figure 13, item 6) and lockwashers (figure 13, item 7).
i.
Slide master cylinder assembly out from outer case (figure 13, item 8).
j.
Loosen and remove cylinder bracket mounting bolts (figure 13, item 9) nuts (figure 13, item 10)
and lockwashers (figure 13, item 11).
0045 00-8
