TM 10-4630-207-13&P
0045 00
3. Inner roller and dampers
a. Remove lunette eye (figure 15, item 1) mounting nuts (figure 15, item 2) and bolts (figure 15,
item 3).
b. Remove lunette eye (figure 15, item 1) from leveler channel (figure 15, item 4).
c.
Remove cotter pins (figure 15, item 5) from castle nuts (figure 15, item 6).
d. Loosen and remove castle nuts (figure 15, item 6) from roller bolts (figure 15, item 7).
e. Remove roller bolts (figure 15, item 7).
f.
Remove inner shell (figure 15, item 8) from outer case (figure 15, item 9).
g. Remove push rod block (figure 15, item 10) from inner shell (figure 15, item 8).
h. Remove cotter pins (figure 15, item 11) from damper pins (figure 15, item 12).
i.
Remove spacer tube (figure 15, item 13) from upper damper (figure 15, item 14) in top slot
(figure 15, item 15).
j.
Remove spacer tube (figure 15, item 13) from lower damper (figure 15, item 16) in bottom slot
(figure 15, item 17).
k.
Remove spacer tube (figure 15, item 13) from spacer (figure 15, item 18) in top slot.
l.
Remove rear rollers (figure 15, item 19) and spacer from inner shell (figure 15, item 8).
m. Remove upper (figure 15, item 14) and lower (figure 15, item 16) dampers from inner shell.
n. Loosen and remove centering plate (figure 15, item 20) mounting bolts (figure 15, item 21) and
lockwashers (figure 15, item 22).
o. Remove centering plate (figure 15, item 20).
0045 00-11
